
76
GB
Installation
Removing transport bolts
Remove the transport bolts as follows:
1. Undo the 4 bolts with a spanner, then remove them.
2. Plug the holes with the transport hole plugs.
3. Keep the transport bolts for future use.
Levelling the washer dryer
1. Check that the feet are securely attached to the cabinet. If not, screw them fully
in and tighten the nuts.
2. Loosen the lock nuts and turn the feet until they each make contact with the
floor.
3. Adjust the feet and lock the nuts with a spanner, making sure the appliance is
steady.
WARNING!
• You must remove the transport bolts from the rear
of the appliance before using it.
• You’ll need the transport bolts again if you move
the product, so make sure you keep them in a
safe place.
WARNING!
• The lock nuts on all four feet must be screwed
tightly against the housing.
1
2
3
4