45
GB
INSTALLING THE WALL BRACKET
The hardware kit supplied includes wall plugs suitable for solid walls made
of concrete, solid brick, stone, etc.
!
Inspect the partition or wall where you want to fix the charg-
ing base. Make sure that the fastenings included are compati-
ble.
If they are not, use expanding wall plugs intended for your type
of partition or wall (use special fixings for hollow walls, BA13
plasterboard walls, hollow bricks, etc.).
These are not provided in the packaging.
• Place the wall bracket against the wall in the desired lo-
cation. Make sure that the height of the bracket match-
es the height of the vacuum cleaner.
• Trace each of the three holes with a pencil. Use a spirit
level to ensure the bracket is perfectly horizontal.
• Drill the holes using a concrete drill bit of suitable diam-
eter.
• Insert the three wall plugs supplied into the holes.
• Place the bracket against the wall and screw the three
screws through the bracket.
