GB
37
Press (-) and (+) at the
same time to stop the
timer; the minute display
will show (--).
Countdown starts immediately
when you have set the time. The
display shows the remaining time
and the timer display flashes for 5
seconds.
When the set time has run out, the
hob will beep for 30 seconds and
the timer display will show (--).
Tips:
a) Press (-) or (+) once on the timer to decrease or increase
the time by 1 minute.
b) Press and hold (-) or (+) on the timer to decrease or
increase the time by 10 minutes.
c) If the timer is set to more than 99 minutes it starts again
from 0 minutes.
Setting the timer to switch off one or more heat zones
Press or for the heat
zone you want to control with
the timer.
Set the time by pressing
the timer control
Press (-) and (+)
at the same time to stop the
timer; the minute display will
show (--).
Countdown starts
immediately when you have
set the time. The display
shows the remaining time
and the timer display flashes
for 5 seconds.
When the timer runs out the heat zone will be switched off
automatically (the display will show H, which means the
zone is still hot).
NOTE!
The red dot next to the power indicator lights up to
show that a zone is selected.
To change the time after the timer has been set, go back to
step 1.
Setting the timer to turn more than one cooking zones
off
If more than one heat zone is being controlled by the timer,
the timer display will show the shortest time (example: if
zone 1 is set to 5 minutes and zone 2 is set to 15 minutes,
the timer display will show 5).
Note!
The red dot next to the power indicator flashes.
When the timer has run out, the heat zone is switched off.
The minute timer will then show the time for the next heat
zone and the dot for that zone will flash.
When the timer runs out, the heat zone will be switched off
automatically.
Note!
The red dot next to the power indicator lights up to
show that a zone is selected.
To change the time after the timer has been set, go back to
step 1.
(set to 15
minutes)
(set to 5
minutes)
