GB
36
Take care to avoid touching hot
surfaces.
The symbol (H) lights up on a heat zone when it is too hot to
touch. The symbol disappears when the surface has cooled
to a safe temperature. A heat zone that is still hot can be
used to warm up another pan (this helps you save energy).
Locking the controls
The controls can be locked (for example to prevent children
from accidentally switching on a heat zone).
When the controls are locked, only the ON/OFF control will
work.
Locking the controls:
Press the lock symbol
The timer display will show (Lo).
Unlocking the controls:
Make sure the ceramic hob is switched on.
Press the lock symbol
for a second or two.
When the hob is locked all the controls are deactivated
(except ON/OFF) . This means you can always switch off
the ceramic hob by pressing ON/OFF in an emergency
(but to continue cooking you must first unlock the hob).
Using the dual heat zone control
• This feature can only be used for heat zone 4.
• The inner zone of the dual heat zone (A) can be used
independently, and zones (B) can be used together.
Turning on the dual heat zone
Select the desired power setting (1–9)
(the inner heat zone will turn on).
Press the dual heat zone control once to
select zone (B).
A neon above the dual cooking zone control will light.
The cooking mode indicator will alternate between (=) and ( ).
Turning off the dual heat zone
If heat zone 4 is set to zone (B), press
once to return to
zone (A) (the dual heat zone is turned off).
When the dual heat zone is turned off, the cooking mode
indicator shows .
Note!
Only heat zone 4 has a dual heat zone.
You can adjust the heat between settings 1 and 9.
Only heat zone 4 can have two zones activated at the same
time.
Timer display
You can use the timer in two different ways:
a) as a minute counter (in this case none of the heat zones
will be switched off when the timer runs out).
b) to switch off one or more of the heat zones (when the set
time has run out).
The timer can be set for a maximum of 99 minutes.
Timer – overview
Using the timer as a minute counter
If you do not select a heat zone
Make sure the ceramic hob is switched on.
NOTE!
You can use the minute counter even if you are not
using any heat zone.
Change the timer setting by
pressing (-) or (+). The minute
counter indicator on the timer
display will start flashing.
Minute display
showing number of
minutes
Timer controls