69
GB
11.
Tip the refrigerator backwards, remove
part (2).
①
Lower hinge part (right)
Adjustable bottom feet part
Adjustable bottom feet part
Self-tapping screws
Adjustable bottom feet part
②
③
④
⑤
①
②
③
④
⑤
(1)
Lowe hinge part (right)
(
2)
Adjustable bottom feet part
(
3)
Adjustable bottom feet part
(
4)
Self-tapping screws
(5)
Adjustable bottom feet part
15.
Move the upper door to an appropri-
ate position, and then fix part (2) by screws
(1). Before fix part (2), pass connector (3)
through hinge (2) refer to step 3. (Please
hold upper door by hand when installing)
①
Special flange screws
②
Upper hinge
MODEL WITHOUT DISPLAY
①
Special flange screws
Upper hinge
Electrical connector
②
③
MODEL WITH DISPLAY
(1)
Special flange screws
(
2)
Upper hinge
(1)
Special flange screws
(
2)
Upper hinge
(
3)
Electrical connector
Model with display
Model without display
12.
Remove part (3) from the lower hinge
pin, loose out the lower hinge pin, change it
to the reverse hole site, and then tighten into
position, then install part (3) on the lower
hinge pin.
13.
Replace the items remount in step 11,
change part (1) to left and then fix them with
screws (4) Finally install part (2).
Lower hinge part (left)
Lower hinge part (left)
14.
Slot the lower door onto the bottom
hinge pin and hold in position. Turn the mid-
dle hinge by 180°, change the washer on
the axis to the lower side, adjust the middle
hinge to the appropriate position and then
install it ensuring the lower door in secured
place.
Note: washer may
stick to lower door.
Washer
Note: Washer may
stick to lower door