66
GB
Reversing the
door
The side at which door opens can be
changed, from the right side (as supplied)
to the left if if the installation site requires.
Warning! When reversing the door, the
appliance must not be connected to the
mains. Ensure that the plug is removed from
the mains socket.
Tools you will need
Not provided
8mm socket wrench
Thin-blade screwdriver
8mm wrench
Cross-shaped screwdriver
Not provided
8 mm socket wrench
Thin-blade screwdriver
Cross-shaped screwdriver
8 mm wrench
Note
If required, you may lay the refigerator on
its back in order to gain access to the
base, you should rest it on soft foam
packaging or similar material to avoid
damaging the backboard of the refrigira-
tor. To reverse the door, the following steps
are generally recommended. If some parts
are not shown in the picture below, please
ignore the relevant description.
1.
Stand the refrigerator upright. Open the
upper door to take out all the door racks
(to aviod damage) and then close the door.
Door racks
Door racks
2.
Remove part (1) loose part (2) from the
top right side of refrigerator.
①
screws
Self-tapping
Upper hinge cover
②
(1)
Self tapping screw
(
2)
Upper hinge cover