76
77
© 2021, Elon Group AB. All rights reserved.
9. Transfer the screw hole covers on the
middle cover plate from left to right (as
shown in figure below).
10. Lay the refrigerator on soft foam
packaging or similar material. Remove
both adjustable bottom feet parts, and
the lower hinge part by unscrewing the
special flanged self-tapping screws.
11. Transfer the lower hinge part to the
left side and fix it with the special
flanged self-tapping screws. Transfer
the adjustable bottom feet parts to the
opposite side and fix them in place.
12. Transfer the lower door to the new
position, adjust the lower hinge part,
insert the hinge pin into the lower hole in
the lower door, then tighten the bolts.
13. Rotate the middle hinge part through
180 degrees, transfer it and adjust its
position, inserting the middle hinge pin
into the upper hole in the lower door,
then tighten the bolts.
1
Stop block
2
Self-tapping screw
Screw hole covers
Screw hole covers
Lower hinge part (right)
Adjustable bottom feet part
Self-tapping screws
Содержание CKF3145V
Страница 32: ...32 2021 Elon Group AB All rights reserved...
Страница 60: ...60 2021 Elon Group AB All rights reserved...
Страница 88: ...88 2021 Elon Group AB All rights reserved...
Страница 116: ...116 2021 Elon Group AB All rights reserved...