74
75
© 2021, Elon Group AB. All rights reserved.
Note: If required you may lay the refrigerator on its back in order to gain access to the
base; you should rest it on soft foam packaging or similar material to avoid damaging
the refrigerator’s backboard. To reverse the door, the following steps are generally
recommended.
1. Stand the refrigerator upright. Open the upper door to take out all door racks (to avoid
damage) and then close the door.
2. Use a putty knife or thin-bladed screwdriver to prize off the screw hole cover at the top
left corner of the refrigerator, and the upper hinge cover at the top left corner of the
refrigerator, and the upper hinge at the top right corner of the refrigerator.
screw hole cover
upper hinge
cover (right)
3. Use an 8 mm socket driver or an
adjustable spanner
to unscrew the special flanged self-
tapping screws which are used to fix the right upper hinge part (support the upper door
with your hand when doing so).
right upper hinge part
Special flanged self
tapping screws
Remove the door shelf
Press inward
4. Remove the upper hinge pin, transfer it to the opposite side and tighten securely, then put
it in a safe place.
Содержание CKF3145V
Страница 32: ...32 2021 Elon Group AB All rights reserved...
Страница 60: ...60 2021 Elon Group AB All rights reserved...
Страница 88: ...88 2021 Elon Group AB All rights reserved...
Страница 116: ...116 2021 Elon Group AB All rights reserved...