elvita CKB1901S, Руководство пользователя

Страница: 12 / 38

12 CKB1901S
GB
REMOVING LIMESCALE
In order for the coffee maker to function optimally, limescale deposits must be
removed regularly (the frequency depends on the hardness of the water and
how often the unit is used). See information below:
1. Pour water and descaler into the water tank up to the maximum level). Use
a descaler specifically for coffee makers, available from many well-stocked
supermarkets.
2. Stand the carafe on the warming plate.
3. Press the ON/OFF button once (the BREW indicator will light up red). The
water will soon start dripping.
4. When about one cup of water has run through, switch off the unit by pres-
sing the ON/OFF button again (the BREW indicator will go out).
5. Leave the unit switched off for 15 minutes, then repeat steps 3–5.
6. Start the unit by pressing the ON/OFF button once and allow all the water in
the tank to run through.
7. Rinse the unit by running at least three brewing cycles using only clean
water (without coffee grounds).
BREWING TIPS
1. To make good coffee, the coffee maker must be clean. Clean the coffee ma-
ker regularly according to the instructions in “Cleaning and maintenance”.
Always use cold drinking water in the coffee maker.
2. Store the pack of coffee in a cool, dark place.
3. For optimum taste, grind the coffee beans immediately before brewing.
4. Never use the coffee grounds more than once.
5. If oil from the coffee grounds collects on the coffee maker, clean the oil off.
Small drops of oil from the coffee grounds may appear on top of the freshly
brewed coffee. Dark roast coffee contains more oil.
PRODUCT DISPOSAL
According to law, electrical and electronic devices must be disposed of at
recycling stations and certain parts must be recycled. Electrical and electronic
devices marked with a recycling symbol must be disposed of at a municipal
recycling station.
TECHNICAL DATA
Model: CKB1901S
Voltage: 220–240V 50/60Hz 900W