80
© 2021, Elon Group AB. All rights reserved.
ADJUSTING PARAMETERS
1. When you have selected the desired parameter, press
Start/Stop
to access that
parameter.
2. Increase or decrease the parameter value by pressing – or +.
3. Press
Start/Stop
to exit parameter adjustment.
EXITING PARAMETER SETTING
1. When you have adjusted the chosen parameters, press
MAN
and
Start/Stop.
2. If you want to restore the parameters to their default settings, press
AUTO
and
Start/
Stop.
ADJUSTING PARAMETERS AND CALIBRATING SENSORS
It is possible to fine-tune the drying cabinet’s auto programs to get the best
results. You should only do this if you feel that:
• The laundry is not being dried adequately.
• The laundry is being over-dried, or the drying time is too long.
To ensure that ECO+ works as efficiently as possible the sensors should be
calibrated.
CALIBRATING SENSORS
NOTE!!!!
IT IS IMPORTANT THAT THE CABINET IS AT ROOM TEMPERATURE BEFORE CALI-
BRATION.
To calibrate the sensors, close the cabinet without any laundry inside, go into the
parameter list, select parameter P400 and set it to a value of 1. This starts the calibra-
tion cycle, which takes around 5 minutes. When the sensors have been calibrated, the
cabinet will restart automatically.
Содержание CABINET
Страница 155: ...152 2021 Elon Group AB All rights reserved...