elvita CABINET, Руководство пользователя

Страница: 76 / 156

73 74
© 2021, Elon Group AB. All rights reserved.
ARRANGING ITEMS FOR DRYING
There are three sets of hanger rails inside the cabinet, depending on the choice of
fittings. Each set has a number of rails for hanging items to dry.
USER ADVICE
• Hang the items to suit the amount of space they take up – not how much they
weigh.
• To get the best drying results – do not lay items flat on the top set of
hanger rails.
• Hang long items closest to the walls of the cabinet and shorter items near the
middle. The most efficient drying results are obtained by hanging the items in this
way.
• Raise the two lower sets of hanger rails if you need to dry long items.
• Hang gloves, hats, scarves and the like on the hangers on the inside of the door.
• All the hanger rails can be pulled out to make it easier to hang laundry.
• The hanger rails must be pushed back before closing the door.
• Do not overload the drying cabinet. This causes laundry to crease and leads to
uneven drying. If possible leave space between items.
• If there is a risk of discolouration from some items, leave plenty of space around
them.
• Avoid drying heavy garments together with lighter items as they take much
longer to dry.
• Lay knitted garments flat to dry. These are heavy when wet and are likely to
stretch if they are hung from the rails.
• Always follow the advice on the care label, if provided.
• If softener or antistatic agents are used, follow the manufacturer’s
instructions for these products.
• Adjust the drying temperature in the cabinet for items that contain foam rubber
or the like. Follow the garment manufacturer’s advice carefully when washing
and drying such items.
AIR FLOW
The diagram shows the air flow through the
drying cabinet.
Keep the area around the ventilation duct free from
dust and dirt.
Make sure the air intake and extractor duct are not
blocked.
See page 65.
NOTE
! When the cabinet is cold the door seal may not
close completely. But once the cabinet is warm the
seal will expand and provide a complete seal.