Product
Part number
Description
CMi2130
(gen.3)
1050124
Integrated MCM for Itron CF 51/55/
ECHO II, Gateway for Mobile Network
(0T/0)
CMi2130
(gen.3)
1100244
Integrated MCM for Itron CF 51/55/
ECHO II, Gateway for Mobile Network
(8T/128 meters)
CMip2130 1050018
Power supply 230 VAC
contAct InforMAtIon
elvaco AB technical support:
Phone: +46 300 434300
E-mail: support @elvaco.com
Online: www.elvaco.com
technIcAl sPecIfIcAtIons
Mechanics
Protection class
IP54
Mounting
In Itron CF 51/55/ECHO II meter
SIM card
Slide, standard size
Electrical connections
Supply voltage
Supplied from Itron meter
Connection M-Bus*
Push-pull connector, cable area 0.2-0.75
mm²
Electrical characteristics
Nominal voltage
100-240 VAC (+/- 10%)
Frequency
50/60 Hz
Power consumption (max) <6 W
Power consumption (nom) <1 W
Installation category
CAT 2
User interface
Green LED
Power
Red LED
Error
Yellow LED
GSM status
Blue LED
USB active
Push button
Factory reset
Configuration
SMS, HTTP, GSM CSD, Telnet
Integrated M-Bus Master*
M-Bus baud rate
2400 and 9600 bit/s
Nominal voltage
28 VDC
Maximum unit loads
8T/12 mA (in addition to the meter in
which the MCM is mounted)
Maximum cable length
1000 m (100 nF/km, maximum 90
Ω
)
Approvals
EMC
EN 61000-6-2, EN 61000-6-3, EN 301 498-
1, EN 310 489-7
Safety
EN 61010-1, CAT 2
orderIng InforMAtIon
sAfety
The warranty does not cover damage to the product caused
by usage in any other way than described in this manual.
Elvaco AB can not be liable for personal injury or property
damage caused by usage in any other way than described in
this manual.
status report indicates missing APn
This may be due to the fact that the auto APN detection is
missing information about your network provider. The APN can
be set manually. See the CMi2130 Operations guide for more
information.
e-mail settings have been configured but no e-mails are received
This may be due to one of the following reasons:
•
No/no valid recipients have been set. Set recipients by
using the command
qset email [recipient]
.
•
The wrong SMTP server is set. Check current SMTP
server by using the command
status
. If no SMTP server
has been set, use the command
qset
email [recipient]
[server]
to set it manually.
•
The report is not correctly activated. Use the command
sch
to schedule e-mail Push Reports (see table).
•
There is not enough credit on the SIM card.
*Only applicable to the CMi2130 equipped with M-Bus Master
