background image

 

 

CMi6160 

User’s Manual English 

 

 

 

 

 

 

 

 

 

 

 

 

CMi6160 

User’s Manual English 

page | 25 (38) 

[2022-10] 

 

v1.4 

 

 

 

 

handled more efficiently. SenML/CBOR also provides one way to structure lists of readings in an efficient 
manner. 
 
The first implementation will use M-Bus for encoding the data transferred, but other formats could be 
implemented in the future. 
 
Note that SenML, CBOR and M-Bus are separate standards, this page describes how products can use 
these three in conjunction for representing multiple measurement values in a compact format suitable for 
radio transmission over for instance NB-IoT. Also, other means of encoding the data than M-Bus can be 
used in the future. 
 
Elvaco uses SenML/CBOR/M-Bus data representation for transferring meter data in a compact and self-
describing manner.  The data being transferred is referred to as a pack, containing one record per 
readout.  
 

Structure of SenML pack 
 

Meter readout data is sent as SenML, i.e., a list (aka array) of readout values (records), encoded using 
CBOR. Each record is a map of key/value pairs using SenML.  
 
Each product that uses the SenML/CBOR format shall follow the requirements below. In addition, it shall 
specify the exact contents of the data values included, meter id format etc. This specification alone is not 
sufficient for building a parser for a specific product. 
 

Base Time 
 

 

Base time

 is used to set a reference time. 

o

 

Timestamps are always encoded according to SenML (i.e., UNIX time). SenML label -1 
“Base time”, SenML definition of Time field 

o

 

This value MUST be included in the first record of the pack 

o

 

All other values have a 

time

 value that is added to the 

base time

 to define the exact time 

of the readout 

 

Base Name 
 

 

Base name

 is used to represent the MeterID (Meter identification in M-Bus) 

o

 

This value MUST be included in the first record of the pack 

o

 

This is represented as a string array (CBOR Major Type 3 - SenML label -

2 “Base 

name”) 

 

The product shall specify the exact format for this field, as it may vary depending 
on what type of “meter” is used. For an M-Bus format it is typically the M-Bus 
data without DIF/VIF. 

o

 

No 

name

 is set for remaining meter readout values, only values belonging to a single 

meter can be represented in one pack. 

 

Data values 

 

 

The actual values from the meter can be encoded using multiple methods, such as M-Bus. 

 

The first record can also contain a data value field containing more information than the 
remaining records in the pack. This is to include more information for the first reading and then 
only a subset of values for the remaining records to save space. (SenML label 8 - 

“Data value”) 

 

Other values 
 

 

(Base) Unit

 is not used, since the unit is specified by the M-Bus data 

 

An “Encoder Version field” is used in a separate record to define the type and version of the 

Содержание 1100450







































Отзывы: