CMi6160
User’s Manual English
CMi6160
User’s Manual English
page | 10 (38)
[2022-10]
v1.4
2. Open the Elvaco OTC app available in Google Play or App Store and scan the module (make
sure NFC is activated on the phone). Go to
Apply mode
, set the power mode
to “active” and
press
Apply settings
.
The NFC is reachable from backside of meter or front if meter cover is
removed. The mobile phone should vibrate three times. This indicates that settings have
successfully been applied.
Network Connection
When activated, CMi6160 will attempt to connect to the mobile network. The phase is indicated by the
green and red LED lights up for 1 second, followed by short flashes on the green LED until the module
has joined the mobile network. When CMi6160 succeeds in connecting to the mobile network, the green
LED will lighten up for 8 seconds, as illustrated by 2.
If the module fails to join the mobile network, it will perform retries until it succeeds. The time between
each attempt will increase for every attempt until it is performed once every day. A new join attempt cycle
can be manually started anytime by using the push button to reboot the module or by deactivating and
activating the module using the Elvaco OTC App.
Figure 5: LED indicators, network connection
5.2.5 Switch off/reboot module
To reboot the module, press and hold the push button for 5-15 seconds. Release the button when the
green LED is lit.
To switch off the module, press and hold the push button for 15-20 seconds. Release the button when
the red LED is lit.
Figure 6: LED indication, reboot / switch-off
