manualshive.com logo in svg

ELTEX WB-2P-LR2, Руководство пользователя

Поделиться
Скачать
ELTEX WB-2P-LR2 Скачать руководство пользователя страница 34

  WB-2P-LR2. User manual

34

•

•

•

•
•
•

•

If 

PPPoE

 is selected as the Internet protocol, then you can specify the secondary access settings:

Secondary access

 – 

defines the method of setting the IP address on the interface for accessing the device if 

the management VLAN is not used:

DHCP 

– operation mode, when IP address, subnet mask, DNS server address, defualt gateway and 

other parameters required for operation are obtained from DHCP server automatically;

Static

 – operation mode, when IP address and other necessary parameters of WAN interface are set 

statically (manually). If 'Static' is selected, the following parameters will be available to set:

External IP address

 – specify device WAN interface IP address in the provider network;

Netmask

 – set subnet mask of device's WAN interface in service provider network;

Default Gateway

 – address, to which a packet will be transmitted in case the route has not been 

found in the route table;

DNS server

 — domain name server address (allows identifying the IP address of the device by 

its domain name).

VLAN

 is a virtual local area network. VLAN consists of a group of hosts combined into a single network regardless 

of their location. The devices grouped to a VLAN have the same identifier VLAN-ID.

Содержание WB-2P-LR2








































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды