ELTEX WB-2P-LR2, Руководство пользователя

Страница: 22 / 71

WB-2P-LR2. User manual
22
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Link Quality Common – parameter that displays the status of the link, calculated based on the number of
sent retransmit packets. The maximum value is 100% (all transmitted packets were sent on the first
attempt), the minimum value is 0% (no packets were successfully sent). The parameter value is calculated
for the entireconnection time;
RSSI – level of signal received from the opposite device, dBm;
SNR – signal/noise ratio, dB;
Uptime – time of wireless bridge operation;
TxRate – channel data rate of transmission, Mbps;
RxRate – channel data rate of receiving, Mbps.
5.1.3 The 'Ethernet ports' submenu
You may view Ethernet ports' state in the Ethernet Ports submenu.
State
Port – port name:
LAN – local network port.
Connection – port connection state:
On – network device is connected to the port (connection is active);
Off – network device is not connected to the port (connection is inactive).
Speed – speed of the external network device connection to this port (10/100/1000 Mbit/s);
Mode – data transmission mode:
Full-duplex – full duplex;
Half-duplex – half duplex;
Transmitted – the quantity of bytes transmitted from the port;
Received – the quantity of bytes received by the port.
To obtain current information on Ethernet ports states, press 'Refresh' button.