RR-10 wireless signal repeater. User manual
24
•
•
•
•
•
•
•
•
•
•
•
•
3.3.2.4 The «Extended Network» page
On the «Extended Network» page, you can change the basic settings for RR-10 wireless interfaces.
5 GHz Wireless Interface
– when checked, the Wi-Fi network for 5 GHz is enabled;
2.4 GHz Wireless Interface
– when checked, the Wi-Fi network for 2.4 GHz is enabled;
SSID
– name of the wireless network; it is used for connection to the device. The maximum length of the
name is 32 characters, with case-sensitive keyboard input. This parameter can consist of numbers, Latin
letters, spaces, and symbols"-", "_", ".","!", ";", "#", in this case, the characters"!" ,";", "#"and a space cannot
be placed first;
Copy Network SSID
button helps to copy the SSID of the network which the RR-10 is connected to;
Disable SSID Broadcast
– if selected, the extended network will not be detected by devices. You will be
able to connect to this network only by specifying the SSID manually;
Security
– network authentication type. The following authentication types are available:
Off
– open authentication, without using encryption and password;
WPA
– WPA authentication using PSK key and TKIP+AES encryption;
WPA2
– WPA2 authentication using PSK key and TKIP+AES encryption;
WPA/WPA2 (Mixed)
– mixed authentication type. When this value is selected, devices that use
WPA or WPA2 authentication type can connect to the wireless network.
Channel
– the channel number for the wireless network. When «Auto» is selected, the channel with less
interference is automatically detected;
Channel Bandwidth
– the bandwidth of the channel on which RR-10 extended network operates, it takes
values of 20, 40 MHz at 2.4 GHz or 20, 40, 80 MHz at 5 GHz.
