RR-10 wireless signal repeater. User manual
12
1.
2.
3.
2.3 Connecting RR-10 to a network
To extend Wi-Fi coverage area, connect RR-10 to the network of your access point (or router).
2.3.1
Method 1. Using WPS button
Connect RR-10 to 220V power network through the power adapter near the Wi-Fi router (or access point)
you want to connect to. Wait until LED start flashing red.
Press WPS button on the Wi-Fi router.
Press and hold WPS button on RR-10 untill the indicator start flashing green. When RR-10 is connected
to the Internet, the indicator will turn off.
2.3.2 Method 2. Via web interface in repeater mode
1. Connect RR-10 to 220V power network through the power adapter near the Wi-Fi router (or access
point) you want to connect to. Wait until LED start flashing red.
2. Connect to the repeater using smartphone or PC through Wi-Fi or Ethernet cable.
a. Through Wi-Fi: connect PC or smartphone to a Wi-Fi network of the repeater — RR-WiFi-XXXX
(where XXXX is the last 4 characters of RR-10 MAC address, the MAC address is written on the label
on the device case).
b. Through Ethernet cable (only for PC): connect LAN port of the repeater to LAN port of your PC
using Ethernet cable.
3. Open a web browser and type the address of the device to URL bar —
или
.
4.Enter username and password to the authorization window. Default username and password are
admin
and
password
correspondingly. Click «Log in».
The way of WPS connection may vary for different routers. Please, read the manual for your
router.
Usually, you have 2 minutes after pressing WPS button on the router to press WPS on RR-10
for successful connection.
By default, the repeater copies the name and Wi-Fi settings of the network to which it will be
connected in both ranges: 5 GHz and 2.4 GHz. If necessary, you can change the name and Wi-Fi
network settings via the web interface.
When connecting to the RG-35 router with the firmware version 2.2.0 or later the RR-10 repeater will
be automatically configured as an agent in the EasyMesh network. In the EasyMesh network all
network parameters are synchronized between the controller and agent.
