RR-10 wireless signal repeater. User manual
17
•
•
3 Device management via the web interface
3.1 Getting started
1.
To start, you need to connect the device through LAN or Wi-Fi interface:
Wireless connection (Wi-Fi):
Connect your PC, phone or tablet to the device Wi-Fi network (
RR-WiFi-XXXX
, where
XXXX
– last 4
characters of RR-10 MAC address);
Wired connection (LAN):
Connect your PC to the device using an Ethernet cable.
2.
Open a web browser, enter the address of the device.
If connection is successful, web interface window with request form with user name (login) and password will
be displayed on a browser.
3.
Enter login and password .
4.
Click the «Log in» button. The «Wizard» page will open in the browser window.
Factory device address:
, IP address: 192.168.0.1, subnet mask: 255.255.255.0
If you connected to a Wi-Fi network with an already configured repeater, make sure that you are
connected to the repeater and not to the access point (router), otherwise access to
will
not be available.
Factory default: login – admin, password – password.
If the device was already configured, the «Status» page will open. The «Wizard» page is only available
on a device with factory default settings.
