ELTEX R120 Series, Руководство по эксплуатации

Страница: 7 / 28

BA-en-3030-1912_R120 / R121A
7
2. Safety
The charging bars of the series R120 / R121A have been designed,
assembled and tested in accordance with state-of-the-art engineering
standards, and they have left our factory in good condition in terms of
safety engineering. If operated improperly, the bars may nonetheless
cause injury to personnel or damage to property. For these reasons
please read these instructions fully and observe the safety notices at all
times.
Warning!
Once the supply voltage of the generator has been activated, never touch
the emission tips of the charging bars. Disconnect the electrical supply by
switching off the high voltage generator before carrying out any mainte-
nance or cleaning work.
2.1 Proper use
The charging bars of the series R120 / R121A must only be used for
applying static electrical charges onto paper, fabrics, foils, plastics etc. for
the purpose of creating a static adhesion effect.
The R120 / R121A charging bars may only be operated with the accom-
panying Eltex high voltage generators (see chap. 8 Technical specifica-
tions). These allow the flexible adaptation to the required high voltages
and currents for different active bar lengths. The safe operation of the
charging bars is only guaranteed by using these Eltex generators.
The manufacturer cannot be held liable under the terms of the warranty if
the appliances are tampered with or are operated improperly.
Modifying or rebuilding the charging bars is not permitted.
Use only original spare parts and accessories supplied by Eltex.
2.2 Hazard identification
These operating instructions refer to possible dangers and risk with the
following symbols:
Warning!
This symbol in the operating instructions refers to certain steps or manipu-
lations which, when carried out improperly, may result in personal injuries.
Caution!
This symbol in the operating instructions refers to certain steps or manipu-
lations which may cause damage to property.