ELTEX R120 Series, Руководство по эксплуатации

Страница: 11 / 28

BA-en-3030-1912_R120 / R121A
11
3. Installation and assembly
3.1 Length of the charging bar
Depending on intended use, the total length of the charging bar may be
selected within the range from 85 mm to 3,985 mm in steps of 15 mm
each. The total length is made up of active length plus 70 mm. Another
100 mm (approx.) must be provided for plugs and bending radius of the
cable.
3.2 Length of the high voltage cable
The standard length of the high voltage cable feeding the charging bar is
5 meters. Special lengths on request. For cable extension use high
voltage distributor box (connection of high voltage plug see chap. 3.5).
3.3 Adjust the angle coupling
If the bar has a angle coupling, then it is aligned towards the tips during ex
factory delivery.
0... 360° (max. 1 revolution)
To turn the angle connection, proceed as follows:
• Loosen the lock nut.
• Turn the angle coupling in its desired position.
• Re-tighten the lock nut.
The maximum permissible angle of turn of the angle coupling is 360°.
Fig. 2:
Angle coupling
1 Lock nut
2 Angle coupling
Z0
00
06
5
1
2