ELTEX IONSTAR RX3, Руководство по эксплуатации

Страница: 15 / 24

BA-en-2058-1808_IONSTAR RX3
15
4. Operation
The discharging bars must be operated with a 24 V DC power supply.
4.1 Startup
Once all the connections have been correctly made, the system is opera-
tional and the supply voltage can be switched on.
4.2 Function monitoring
The proper function of the unit is signaled via the LEDs in the connection
zone.
• During startup, all three LEDs (green, yellow, red) of the discharging
bar must light up briefly.
• The green LED lights up as soon as the discharging bar is operational.
• Brief disruptions (1/2 second) of the green LED at 10 second intervals
are possible; the discharging bar otherwise operates continuously.
• The yellow LED signals warning messages:
- LED off: optimum working range
- LED flashing in 1/2 second cycles:
Distance current working range < 350 mm
- LED flashing in 3 second cycles:
Distance current working range > 700 mm
The discharging bar continues ot operate without disruption;
the desired discharging power may not be reached.
• The red LED lights up or flashes as soon as a malfunction is detected.
Note!
Malfunctions are not saved. The disruption of the supply voltage
automatically cancels the malfunction message.
4.3 Function control
Use the Eltex Volt Stick or a glow-lamp voltage tester to check the proper
function of the emission points. Quote Article No. 109136 when ordering
the Volt Stick from Eltex.