ELTEX IONSTAR RX3 Скачать руководство пользователя страница 10

10

BA-en-2058-1808_IONSTAR RX3

touch. If contact is made, the energy transferred is so low that there is 
no risk of injury.

• Potential risk for wearers of cardiac pacemakers:

Moving the chest closer than 3.5 cm to the emission tips of the 
discharging bars or making surface contact with several emission tips 
(touching a single tip is not critical) can result in a temporary switchover 
of the cardiac pacemaker into the fault mode. Permanent proximity or 
contact can therefore cause severe problems. 
If it is likely that the chest of such a person comes closer than 3.5 cm to 
the emission tips of the discharging bar, or if several emission tips are 
touched at the same time, the appropriate warning notices must be dis-
played.

• The operation of the bars can generate ozone. The ozone concentra-

tion levels developing near the bars depend on many different factors 
such as site of installation, bar current and voltage, air circulation, etc., 
and can therefore not be specified in general terms.
If the maximum allowable concentration of ozone must be observed at 
the site of installation of the bar, the concentration must be measured 
on site.
The AGW value (maximum admissible concentration) serves to assess 
the ozone concentration at the workplace. The user must make sure 
that the appropriate national AGW value is at no times exceeded, e.g. 
in Germany the ozone concentration occurring during the operation of 
the system must not exceed the recommended value based on interna-
tional limits of 0.06 ml/m³ (0.12 mg/m³).

• Mechanical or electrical modifications of the discharging bars are not 

permitted. 

Содержание IONSTAR RX3

























Отзывы: