ELTEX IONSTAR RX3, Руководство по эксплуатации

Страница: 13 / 24

BA-en-2058-1808_IONSTAR RX3
13
Alignment of the discharging bar
Depending on application, the distance between discharging bar and sub-
strate ought to be 200...800 mm.
The discharging bar must be aligned such that it is mounted centered in
relation to the reel core or - depending on the type of mounting - perpen-
dicular to the material web.
3.2 Connecting supply voltage and connector
The operation of the discharging bar IONSTAR RX3 requires a 24V DC
supply designed for a maximum current of 3 A.
The supply voltage is to be supplied by the customer and is connected via
the connector plug supplied. Alternatively, the optional power supply unit
may be used.
To ensure that no voltage is supplied to the bars when the material web is
at rest, enabling the supply voltage to the unit via machine contact is
recommended. If the material web is at rest, or if the machine is not in
operation, no high voltage is supplied to the bars in this case.
3.3 Ground connection
A permanent ground connection must be made via the grounding terminal
over the shortest possible distance to the conductive machine contact
(6, Fig. 1). A grounding cable with a conductor cross-section of
10 mm²
and a maximum length of 1 meter is required for trouble-free operation.
Fig. 5:
Cylindrical zone
free of conductive
material at a
distance R
ZZ-1
0
99
88
d_
5