Eltek Smartpack2, Руководство пользователя

Страница: 27 / 32

3 About Power System Configuration
User's Guide Smartpack2 Master Controller
350020.013, Issue 2.0, 2014 Jan
27
Parameters for Analogue Alarm Monitors (A2)
Example to monitor analogue values such as voltage, current, etc with 2 limits.
# Description Value Unit/Label Note
Monitor
– Enable/Disable?

Enable Activates or deactivates the alarm monitor
Manual Reset Disabled
Or “All Levels” or “MajorHigh Only”
(a)
Hysteresis 100 Amp (b)
TimeDelay
5 Seconds Selects among delay time options (b)
MajorHigh AlarmLevel 5000 Amp Upper limit
MajorHigh AlarmGroup
Major Alarm Selects the alarm group to activate
MinorHigh AlarmLevel 4000 Amp Lower limit
MinorHigh AlarmGroup Minor Alarm Selects the alarm group to activate
Parameters for Analogue Alarm Monitors (A4)
Example to monitor analogue values such as voltage, current, etc with 4 limits.
# Description Value Unit/Label Note
Monitor
– Enable/Disable? 
Enable Activates or deactivates the alarm monitor
Manual Reset Disabled
Or “All Levels” or “MajorHigh Only”
(a)
Hysteresis 10 Volt AC (b)
TimeDelay
7 Seconds Selects among delay time options (b)
MajorHigh AlarmLevel 280 Volt AC Major High upper limit
MajorHigh AlarmGroup Mains Alarm Selects the alarm group to activate
MinorHigh AlarmLevel 260 Volt AC Minor High upper limit
MinorHigh AlarmGroup
Mains Alarm Selects the alarm group to activate
MinorLow AlarmLevel 100 Volt AC Minor Low lower limit
MinorLow AlarmGroup Mains Alarm Selects the alarm group to activate
MajorLow AlarmLevel 80 Volt AC Major Low lower limit
MajorLow AlarmGroup Mains Alarm Selects the alarm group to activate
Parameters for Special Alarm Monitors (LVD)
Example to monitor the battery voltage and control the LVD contactors.
# Description Value Unit/Label Note
Monitor
– Enable/Disable? 
Enable Activates or deactivates the alarm monitor
MainsIndependent Enable/Disable?

Enable (c)
Temp. Dependant Enable/Disable?

Enable (d)
Disconnect Voltage [V] 43,00 (e)
Reconnect Voltage [V] 48,00 (f)
Delay After Disconnect [seconds] 000 Selects among delay time options (g)
AlarmGroup LVBD
Selects the alarm group to activate
Minor Low lower limit
Selects the alarm group to activate
Major Low lower limit
Selects the alarm group to activate
The LVD alarm monitors “observe” that the battery voltage (input signal) is within limits,
otherwise they activate the LVD contactors (alarm group).