Eltek Smartpack2, Руководство пользователя

Страница: 22 / 32

3 About Power System Configuration
22
User's Guide Smartpack2 Master Controller
350020.013, Issue 2.0, 2014 Jan
When upgrading the firmware of controllers and control units — if several units of the
same type are connected to the CAN bus — the
Smartpack2 Master controller will request
you to specify the CAN bus ID number of the unit to upgrade.
Flash Memory Storage
You can store files in the Smartpack S controller’s embedded Flash Memory (data storage
device) and use them for firmware upgrading of controllers and control units, as well as for
storage of logs, language codes, and for exporting & importing configuration files.
When upgrading the firmware of controllers and control units — if several units of the
same type are connected to the CAN bus — the
Smartpack S controller will request you to
specify the CAN bus ID number of the unit to upgrade.
FTP Client
The files stored in the controller’s Flash memory are also accessible from a computer, via
the FTP client embedded in the controller’s web-based user interface.
NOTICE:
You must use the “Admin” log in account, to be able to use the embedded FTP client.
An external FTP client, such as e.g. “FileZilla” (freeware) — running on a computer
connected to the controller’s Ethernet port — can also be used to access the files on the
controller’s embedded Flash memory
WARNING:
It is not recommended to use the FTP client embedded in Windows Explorer.
WARNING:
Before uploading files to the Flash memory (4MB), check that there is enough storage space. Also, consider deleting files
that are no longer necessary.