Elster ACM WAVE SYSTEM RF, Руководство по эксплуатации

Страница: 1 / 6

Edition 02.10
© 2008 – 2010 Elster GmbH
➔
www.docuthek.com
GB NL SK D
Please read and keep in a safe place
Please read through these instructions
carefully before installing or operating. Following the
installation, pass the instructions on to the opera-
tor. This unit must be installed and commissioned
in accordance with the regulations and standards
in force. These instructions can also be found at
www.docuthek.com.
Explanation of symbols
• , 1 , 2 ,  ... = Action
▷
= Instruction
Liability
We will not be held liable for damages resulting
from non-observance of the instructions and non-
compliant use.
Safety instructions
Information that is relevant for safety is indicated in
the instructions as follows:
DANGER
Indicates potentially fatal situations.
WARNING
Indicates possible danger to life and limb.
CAUTION
Indicates possible material damage.
All interventions may only be carried out by qualified
gas technicians. Electrical interventions may only be
carried out by qualified electricians.
Conversion, spare parts
All technical changes are prohibited. Only use OEM
spare parts.
Transport
On receipt of the product, check that the delivery is
complete (see Part designations). Report any trans-
port damage immediately.
Storage
Store the product in a dry place. Ambient tempera-
ture: see Technical data.
Disposal
Components, particularly batteries, are to be dis-
posed of separately.
On request, old units may be returned carriage paid
to Elster GmbH in accordance with the relevant waste
legislation requirements (for Germany: KrW-/AbfG
[Act for Promoting Closed Substance Cycle Waste
Management and Ensuring Environmentally Compat-
ible Waste Disposal]).
Operating instructions
Translation from the German
D
GB
F
NL
I
E
GB-1
Safety
Contents
Communications module ACM
WAVE SYSTEM RF for gas meters
with Absolute ENCODER AE2 with
and without smart valve
Communications module ACM WAVE
SYSTEM RF for gas meters with Absolute
ENCODER AE2 with and without smart valve 1
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Checking the usage . . . . . . . . . . . . . . . . . . . . . 2
Type code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Part designations . . . . . . . . . . . . . . . . . . . . . . . . 2
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Attaching the RECEIVER base plate. . . . . . . . . . 2
Wiring the RECEIVER. . . . . . . . . . . . . . . . . . . . . 3
Installing the gas meter . . . . . . . . . . . . . . . . . . . 3
Attaching the TRANSMITTER. . . . . . . . . . . . . . . 3
Commissioning. . . . . . . . . . . . . . . . . . . . . . . . . 4
Installing the TRANSMITTER/RECEIVER . . . . . . 4
Synchronizing the TRANSMITTER/RECEIVER
failed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Installing the REPEATER . . . . . . . . . . . . . . . . . . 4
Synchronizing the REPEATER with the
RECEIVER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Synchronizing the REPEATER with the
TRANSMITTER. . . . . . . . . . . . . . . . . . . . . . . . . . 4
Synchronizing the REPEATER failed . . . . . . . . . 4
Finishing installation . . . . . . . . . . . . . . . . . . . . . . 4
Closing and sealing the REPEATER . . . . . . . . . . 4
Replacement. . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Assistance in the event of malfunction . . . . . 5
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . 6
Declaration of conformity . . . . . . . . . . . . . . . . 6
Contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6