Elson BUSHPEX, Инструкция по эксплуатации и установке, Страница: 22 / 40

6
Jointing
Instruction
22
elson BUSHPEX Pull-On
1
2
3
Cut the pipe clean and
square using elson BUSHPEX
pipe cu�ers, Any kinks,
damage, imperfec�ons must
be cut out and disposed.
Slide the join�ng sleeve over
the pipe end with the
internal tapered end of the
sleve facing the joint. Keep
the sleeve at least 50mm
from the pipe end.
Inspect the expander tool
and expander heads prior to
use for damage or dirt build
up on the heads. Do not use
if damaged or missing parts.
Ensure the expander head
screws completely onto the
expander.
Never use incompa�ble heads. Insert the expander head
into the pipe end and expand the pipe once, then rotate the
expander tool approximately 30 degrees and expand the
pipe again. This process ensures even and complete pipe
expansion.
Note: Any damage to the pipe and from the use of a
defec�ve expander tool shall be discarded and cut off.