
6
Frequently asked questions
20
elson BUSHPEX Pull-On
FAQ
Can elson BUSHPEX pipe be installed under a slab?
YES
– with the following requirements
•
Installa�on in accordance with AS/NZS
3500.
• Installed within elson BUSHPEX corrugated sleeve
conduit.
•
Must be sleeved when penetra�ng through a slab.
•
Installed in a single con�nuous length without
fi�ngs.
Can elson BUSHPEX pipe be used for underground cold
water service applications?
YES
– when installed in accordance with AS/NZS
3500
requirements.
Can elson BUSHPEX
pipe and fittings be used to connect
solar panels to the storage tank?
NO
– Australian Standards do NOT allow PE-X Pipe to be
used on the flow or return lines between solar panels and
solar storage vessels.
Can braz
e-on adaptors be installed after crimping elson
BUSHPEX Pipe?
NO
– Brazing must only ever be done prior to the join�ng
of the elson BUSHPEX pipe to the fi�ng. Alterna�vely use
elson PRESS Pull-On fi�ngs from copper to elson BUSHPEX
Pull-On.
Is there anything I need to do before using Pull-On Tools?
YES
– follow all of these important steps below:
Содержание BUSHPEX
