24
5. Sending of meteorological and automatic data
After the setting of the operating command in case of wind or rain alarm, you
may now select, whether the meteorological data and the automatic commands
of Solexa shall be submitted by radio to the motor control units of system XS.
Leave this display at
if Solexa is used as conventional single-channel control
system. The function „Sending of weather and automatic data“ must only be
activated if Solexa shall cooperate with motor control devices (e.g. XS MSG2-AP)
in the control system XS.
Press the key
in order to switch between the displays Off and On.
Select
if no meteorological data and automatic commands shall be sent
(setting for conventional awning or blind control) or
if the meteorological data and the automatic commands of the
Solexa shall be sent to motor control devices of system XS (setting
for the use in the control system XS).
This setting offers the option to centrally operate all drive
mechanisms in system XS from the Solexa operating unit (see
chapter “Manual operation”).
Press the
key in order to access the next setting step.