21
As soon as you have confirmed
(clear) with the
key, the radio connection
is deleted. The display automatically skips to
(learn) in order to enable the
teaching in of a new connection.
Delete all radio connections of the weather station
You can delete all radio connections of the weather station with operating units
and hand-held transmitters at once by pressing the programming key for longer
than 5 seconds. The programming LED will go on for 1 second for affirmation.
Connections to motor control units are not deleted during this procedure.
2. Rotational direction of the motor
After the teaching in of the radio connection to the weather station, you may now
set the rotational direction of the motor.
If the up and down connection cables have been mixed up when connecting the
drive mechanism, this may be corrected in this step. First extend the shading a
little bit for the rotational direction test. Check both arrow keys and make a setting
in the display, whether the shading retracts (i.e. opens) with or with .
If the shading opens (
, open) with key , then select the display
(down)
with the key
.
If the shading opens (
, open) with key , then select the display
(up) with
the key
.
Press the
key in order to access the next setting step.
Rain and wind alarm are deactivated for this test. Please
observe not to damage the shading by moisture or wind.