12
Details for the installation
Do not open
weather station if water (rain) might ingress: even some
drops might damage the electronic system.
Observe the correct connections. Incorrect connections may destroy the weather station
or connected electronic devices.
Please take care not to damage the temperature sensor (small blank at the bottom part
of the housing.) when mounting the weather station. Please also take care not to break
away or bend the cable connection between the blank and the rain sensor when
connecting the weather station.
Remove all existing protection labels after installation.
The measured wind value and thus all other wind switching outputs may only be
supplied 60 seconds after the supply voltage has been connected.
Maintenance
The weather station must regularly be checked for dirt twice a year and cleaned if
necessary. In case of severe dirt, the wind sensor may not work properly anymore, there
might be a permanent rain message or the station may not identify the sun anymore.
As a precaution, the weather station should always be
separated from power supply for maintenance works (e.g.
deactivate or remove fuse).
