elsner elektronik KNX T-UN 130, Установка и настройка

Страница: 23 / 26

21 Parameter settings
Temperature Sensor KNX T-UN • Version: 27.01.2020 • Technical changes and errors excepted.
OR logic
5.6.1. AND and/or OR logic 1 / 2 / 3 / 4
AND- and OR logic gates provide the same setting options. Assign the inputs to a
switching event and set the send behaviour.
If the logic output sends one 1-bit object:
If the logic output sends two 8-bit objects:
5.6.2. AND logic connection inputs
Do not use
Communications object logic input 1
Communications object logic input 1 inverted
Communications object logic input 2
Communications object logic input 2 inverted
Communications object logic input 3
Communications object logic input 3 inverted
Logic 1 + 2 + 3 + 4 not active • active
1. / 2. / 3. / 4. Input • do not use
• all switching events which are available
to the sensor (see AND logic connection
inputs , Page 21)“)
Logic output • never sends
• sends one 1-bit object
• sends two 8-bit objects
Logic output sends one 1-bit object
if logic = 1

object value 0 • 1
if logic = 0

object value 0 • 1
Logic output sends two 8-bit objects
If logic = 1

Object A value 0...255; 127
If logic = 0

Object A value 0...255
If logic = 1

Object B value 0...255; 127
If logic = 0

Object B value 0...255
Send communication object and logic
1/2/3/4 • on change of logic
• on change of logic to 1
• on change of logic to 0
• on change of logic and periodically
• on change of logic to 1 and periodically
• on change of logic to 0 and periodically
Send periodically every
(only if sent periodically)
5 s • 10 s • 30 s • 1 min • … • 2 h