elsner elektronik 70574, Установка и настройка

Страница: 18 / 26

16 Setting parameters
Actuator KNX R1-B4 compact 16 A • Version: 28.05.2020 • Technical changes and errors excepted.
Specify a switch state. If it is allowed to save scenes via the bus, this state only applies
after the ETS download until the first manual saving. Afterwards, the new switch state
saved in the actuator is used.
6.4. Inputs
6.4.1. Input As a bus button
Input 1 can be defined as bus or actuator button. The inputs 2-4 are bus buttons.
If the input is used as a free bus button, it sends a previously set value to the bus when
activated. Various parameters for frequently used bus functions are integrated in the
program file of the actuator. The inputs can be configured very easily as switches, drive
controls, dimmers, for sending values and for scene recall.
Input as switch:
If a button with switching function is assigned to the input, select the bus function
"Switch" and define which value is sent when the button is pressed/released and when
it is sent.
Switch state inactive • active
Bus function • Switch
• Changeover switch
• Shutter
• Blinds
• Awning
• Window
• Dimmer
• 8-bit encoder
• Temperature encoder
• Brightness encoder
• Scenes
Function Switch
Command when pressing the button • send 0
• send 1
• Do not send message
Command when releasing the button • send 0
• send 1
• Do not send message
Send value • on change
• on change to 1
• on change to 0
• on change and periodically
• on change to 1 and periodically
• on change to 0 and periodically