6
Operating the display
Solexa II Control
• from software version weather station 1.3, display 2.1 • Version: 11.05.2017
Technical changes and errors excepted.
1.3. Display and operating options on the start
screen
The display has various areas in which information and functions can be called up.
Loading data.
1 – Mode
The actual mode of the selected output is displayed.
Tap in the area of the symbol to change mode (Automatic/Manual).
Press in the area of the (Automatic/Manual) symbol to set
all
outputs to automatic si-
multaneously (press until the high beep "button held down" sounds).
Automatic mode. Automatic functions for the selected output are active.
Manual mode. Output was operated manually or switched to manual mode.
After an output has been operated manually, it remains in manual mode. Auto-
matic mode is inactive. Set an automatic mode reset so that the output switches back
to automatic, once a day or after a certain time after being operated manually (see
Gen-
eral settings
chapter:
Automatic reset
in the manual and automatic reset in the individ-
ual automatic descriptions in the manual).
2 – Battery charging status
Observe the chapter
9
Selected output
5
Temperature/
weather
8
Rocker switch:
Change output and
operate manually
Outputs
9
(Type, display
position)
4
To the
Settings
Charging status
Battery
2
3
Time
Mode
1
Weekday
3
7
Functions selected
output
6
Time-reception
