ELSA Synergy 2000, Руководство пользователя

Страница: 7 / 50

|
Introduction
7
| ELSA Synergy 2000 |
EN
1 Introduction
1.1 Highlights of the ELSA Synergy 2000
쎲
NVIDIA Quadro2 EX processor
쎲
32 MB SDRAM (unified memory)
쎲
Application drivers for AutoCAD and 3D Studio MAX
쎲
Support via Internet and hotline
쎲
Six-year warranty
1.2 What's in the box?
You will notice if your graphics board is missing. But you need to check that
the box contains all of the following:
쎲
Graphics board
쎲
Installation Guide
쎲
Manual
쎲
CD-ROM with installation and driver software and utilities
If any part is missing please contact your dealer. ELSA reserves the right to
vary the products supplied without prior notice. The current scope of delivery
is described on our web site.
1.3 What hardware do I need?
쎲
Computer: A system with at least a Celeron, Pentium II or AMD Duron or
K6-2 processor (300 MHz or higher), preferably a Pentium III/IV or AMD
Athlon or Thunderbird and a minimum of 64 MB RAM is required. Approx.
20 MB free disk space and a CD-ROM drive are required for the installa-
tion.
쎲
Monitor: The ELSA Synergy 2000 works with a standard IBM VGA com-
patible analog monitor with a horizontal scan frequency of at least 31.5
kHz.