ELSA Synergy 2000, Руководство пользователя

Страница: 22 / 50

Useful stuff and more
|
| ELSA Synergy 2000 |
22
EN
쎲
Object filters
쎲
Selective rendering of details (partial geometries)
쎲
Control of the representation precision
Installation
The QuadroView installation program can be found on the enclosed CD. Insert
the CD in your CD-ROM drive.
햲
In the root directory of the CD-ROM drive, start the program SETUP.EXE .
햳
Follow the instructions in the dialogs.
The following points should be considered:
쎲
During installation you will be asked, whether or not to install Quadro-
View with a link to AutoCAD. If you have AutoCAD installed on your sys-
tem, you should choose the installation with the link. This will integrate
QuadroView into AutoCAD. (Of course, you can still use QuadroView in
stand-alone mode.)
쎲
So that QuadroView is automatically called when AutoCAD is started,
one of the installation dialogs asks about the ACAD.RX file used by your
AutoCAD installation. In most cases, the default file selected by the
installation program is correct.
During installation, it is also possible to search your hard drive or the network
drive, to make another ACAD.RX file the start file for QuadroView.
Once you have successfully completed installation, you can directly start
AutoCAD with QuadroView and begin working.
Press F1 to call up the online help. There you will find information on the
capabilities that QuadroView offers.
3.5 Tools for 3D Studio MAX/VIZ
You can achieve significantly improved working speeds and ergonomics with
the drivers and extensions for 3D Studio MAX.
3.5.1 ELSA MAXtreme
ELSA offers a special driver for 3D Studio MAX and VIZ. The optimization of
the ELSA driver lets you reach higher display speeds and thus is indispens-
able for the
ELSA Synergy 2000.