ELSA Synergy 2000, Руководство пользователя

Страница: 33 / 50

|
Technical data
33
| ELSA Synergy 2000 |
EN
5 Technical data
Those with a technical interest will find more detailed information regarding
the
ELSA Synergy 2000 in this chapter. All interfaces and their assignments
are described in detail.
5.1 Characteristics of the graphics board
5.2 ELSA graphics board addresses
The ELSA graphics boards are 100% IBM VGA compatible and occupy the
same memory area and specific addresses in the I/O range. The memory
range above 1MB is automatically assigned through the PCI BIOS interface.
If you come across any address conflicts, try to modify the I/O address of the
expansion board causing the conflict. The addresses of the ELSA graphics
boards cannot be changed! The ELSA graphics board also requires an inter-
rupt (IRQ) which is free. This may have to be reserved in the computer’s BIOS.
For help with this theme, refer to the manual for your mainboard.
To ensure that your system functions properly, the addresses and ranges
occupied by the ELSA graphics board must not be accessed simultaneously
by other hardware components. The following addresses are assigned:
쎲
I/O addresses:
Standard VGA I/O (3B0-3DF)
ELSA Synergy 2000
Graphics processor Quadro2 EX by NVIDIA
RAMDAC pixel clock 350MHz
On-board memory 32-MB SDRAM
BIOS 64kB Flash BIOS with VBE 3.0 support
Bus system AGP, 1x/2x/4x (AGP 4x is only supported by certain mainboard
types such as Intel 820, Intel 840 and VIA Apollo Pro133A)
VESA DDC DDC2B