ELSA Lancom DSL/10 Office, Руководство пользователя

Страница: 34 / 106

Operating modes and functions
ELSA LANCOM DSL/10 Office
26
Name-list
The name list in the ELSA LANconfig can be found in the 'Communication' configuration
section on the 'Remote Stations' tab, or under
/Setup/WAN-module/Name List
during telnet or terminal sessions.
To define the available remote stations, enter them in the name list with a suitable name
and additional parameters:
K
Name
This name is used to identify the remote station in the router modules. Once the
router module has used the IP address to find which remote station can be used to
reach the desired destination, the associated connection parameters can be
determined from the name list.
K
Time Out
This period indicates how long the connection will remain active after no more data
are transferred.
If a zero is given as time out, the connection will not be automatically terminated!
K
Access Concentrator
The access concentrator represents the server that can be accessed over this
connection. If more than one provider is available over your xDSL terminal, select
the one that is responsible for the IP address group of this remote station with the
name of the AC.
The value for the AC will be supplied by your provider.
If a value for the AC is not entered, every AC that offers the requested service will
be accepted.
K
Service
Enter the service that you wish to use with your provider. This can be simple
Internet browsing, video downstream or other.
The value for the service will be supplied by your provider.
If a value for the service is not entered, every service that offers the requested AC
will be accepted.
If neither access concentrator nor service is given, the router will connect to the first AC
that reacts to the query through the switching center.