Page 16
Technical Manual MSR Universal Stage Controller
EG-Statement of Conformity
set up 6.9.04
checked: 6.9.04
approved: 6.9.04
by:
tkd/jr
by: ek/al
by:
mv/mh
*The conformity with IEC 1000-4-3 is derived from the IEC 1000-4-2 and IEC 1000-4-4 test results. The correlation with IEC 1000-4-3 is based on test results which
are located on site at the manufacturer.
We state the following: When operated in accordance with the technical manual, the criteria have been met that are outlined in the
guidelines of the council for alignment of statutory orders of the member states on electro-magnetic consistency ( 89/336/EWG ). This declaration
is valid for those products covered by the technical manual which itself is part of the declaration. Following standards were consulted for the
confirmity testing with regard to electromagnetic consistency :
IEC 1000-4-1, IEC 1000-4-2, IEC 1000-4-3*, IEC 1000-4-4, IEC 1000-4-5, EN 55011 B, EN 50081, part 1 and 2;
EN 50082, part 1 and 2, EN 61010 part 1, EN 61010-1/A2 part 1/A1
This statement is made from the manufacturer / importer
by:
ELREHA Elektronische Regelungen GmbH
Klaus Birkner, Developement and
68766 Hockenheim
and leader of the EMC-Laboratory
(Name / Anschrift /
name / adress)
Hockenheim
31.5.1999
.............................................
Ort/
city
Datum/
date
Unterschrift/
sign
This manual, which is part of the product, has been set up with care and our best knowledge, but mistakes are still possible.
If you have any problems, difficulties or questions please don't hesitate asking our technical support.
Technical details can be changed without notice, especially the software. Please note that the described functions are only valid
for units containing the software with the version-number shown on page 1.
Units with an other software number can work a little bit different. You will find this software number on the label of the unit too.
