background image

Technical Manual MiniMEP Data Loggers

page 14

Set up :

17.5.06, tkd/jr

checked:

18.5.06, ek/jk

approved:

18.5.06, mv/sha

This manual has been set up with care and to our best knowledge, but mistakes are still possible. Technical details, especially the software, can
be changed without notice. Please note that this manual is only valid for controllers containing the software-version shown on page 1. This version-
number is also displayed in the parameter page. If you have still problems or difficulties or questions please don´t hesitate asking our technical
support. Called trademarks are properties of their companies.

(copy)

We state the following: When operated in accordance with the technical manual, the criteria have been met that are outlined in
the guidelines of the council for alignment of statutory orders of the member states on electro-magnetic consistency (89/336/EWG) and the Low Voltage
Directive (73/23/EWG) as amended by (93/68/EWG). This declaration is valid for those products covered by the technical manual which itself is part of
the declaration.

 

To meet the requirements, the currently valid versions of the relevant standards have been used.

This statement is made from the manufacturer / importer

by:

ELREHA Elektronische Regelungen GmbH

Werner Roemer, 

Technical Director

D-68766 Hockenheim, Germany

www.elreha.de

Hockenheim

.............

12.09.2005

......................................................

(

name / adress

)

city

date

sign

EG-Statement of Conformity

Содержание MiniMEP 2404S
















Отзывы: