ELPRO LIBERO Tx, Руководство по эксплуатации

Страница: 29 / 80

EN - 29 liberoCONFIG
LI6002Eg
CONFIGURATION SOFTWARE
3
3.4.6 PDF Options
Selection of the infor-
mation contained in
the PDF report
Inspection Range The inspection range determines the period over which the data shall be evaluated. There
are 3 possibilities for the statistic calculation:
• Graphics & Alarm handling all values in Memory
All data logged will be used for the statistical evaluation.
• Graphics & Alarm handling "Last Transit - Arrived"
Only data and alarms logged during the last transit - arrived period will be used for the
statistical calculation. If the ARRIVED-button was not pressed, all values until the
moment of evaluation will be used.
• Graphics all values in Memory & Alarm handling "Last Transit - Arrived"
All data logged but only alarms during the last transit - arrived periode will be used for
the statistical evaluation.

Show statistic: 5.3.2 Statistics

3.4.6.2 Example: PDF report - Transit - Arrived period
Y-Axis Scaling of
Chart • Automatically Zoom
The Y-axis will automatically be scaled according to the range of the measured values.
THE "INSPECTION RANGE" IS GOING TO INFLUENCE:
• Alarm statistics on the display
• Alarm representation in the PDF report
• All measuring values in memory