6.0 REMOTE Control Function
：
HS10M supports RS232 and TCP/IP with the protocol as it follows:
6.1 For RS232 CONSOLE:
Connect the RS232 Sub-D 15 pin f. CONSOLE port to the COM port of the host by a Sub-D 15
pin F/M RS232 straight cable (pin 2 to pin 2; pin 3 to pin 3, pin 5 to pin 5)
Communication format is 9600, 8, N, 1 (9600 bps, 8 data bits, no parity check, 1 stop bit)
6.2 For Ethernet TCP/IP (Winsock)
Default IP address:
192.168.0.10, but user
must type his own IP address
(see 4.3);
Port:47011
6.2 Operation Instruction format:
C
△
(Space) + Par Enter
[Command]
[Description]
------------------------- -------------------------------------------
POWER
△
[y]
Power on/off
TX[n]
△
[n]
Set RXn to TXn
RX[n]
△
[m,m,m,m…]
Set RXn to multiple TXm,m,m,m...
MATRIX_ID
△
[p]
Set Matrix IR ID
EDID_COPY
△
[n]
Copy EDID from TX n
SAVE
△
[n]
Save setting to #n
LOAD
△
[n]
Load setting from #n
KEY
△
[y]
Panel button& IR remote control Lock/Unlock
DHCP
△
[y]
DHCP client on/off
IP_ADDRESS
△
[x.x.x.x]
Set Matrix IP address
SUBNET_MASK
△
[x.x.x.x]
Set Matrix subnet mask
