25
Output Channel Switching
Left : icon for matrix
Center upper big font for matrix name,
Center middle small font for matrix IP
Center lower small font for matrix type (4 by 4 or 10 by 10)
Notice: if shows
「
Specify the host does not exist
」
means the matrix not
exist
Touch the block of matrix to enter Controler page
Top right 「Refresh」to renew the status of matrix
Below「Refresh」button to power on/off the matrix
The block under device are Output 1~ Output 10
(4 by 4 matrix only shows Output 1~Output 4)
Left side shows output device name
Right sideshows current input device name
Bottom left「Save Scene」to save the scenes
Bottom right「Load Scene」to load the scenes
Touch output block to enter Channel Selection page
