26
www.elpro.com.au
245U-E Wireless Ethernet Modem User Manual
Rev Version 2.24
NOTE Remember to set the switch back to the RUN position and restart the module at the conclusion of
configuration for resumption of normal operation.
3. Power up the 245U-E module.
4. On the PC, open the Control Panel, and then open Network Settings.
The following description is for Windows XP. Earlier Windows operating systems have similar settings.
5. Open Properties of Local Area Connection.
6. Select Internet Protocol (TCP/IP) and click Properties.
Figure 23
Local Area Connection
7. On the General tab, enter the IP address 192.168.0.1 and subnet mask 255.255.255.0, and then click
OK.