Analogue TV Tuner
With the UNIT you can also watch TV by using the analogue TV Tuner. Here you can
connect the device to a roof antenna or to the analogue cable (CATV).
How to change to the analogue TV tuner?
Press the
SOURCE
button to select the ATV mode.
If you uses the first time the analogue TV Tuner, you should start to search the TV stations.
For entering into the ATV Setup page, please press the
SETUP
button. The ATV menu
appears on the screen.
AUTO SEARCH
Press the
DOWN
button to select
―
Auto
Search
‖ and start the automatically searching by
pressing the
RIGHT
button.
Notes:
The Auto Search always start from the
program number 0.
If the indication frequency stopped for a
while during the searching, it means a
new channel is found and will be save into
the channel list.
If a weak signal received the channel
may be skipped and will be not save into
the list.
To stop the searching, you can press the
SETUP
button.
To start the automatic search you can press the AUO button on the remote control.
MANUAL SEARCH
Press the
DOWN
button to select
―
Manual Search
‖ and start the searching by pressing the
RIGHT
button.
Note:
Please refer the comments by the AUTO SEARCH.
FINE
If the search run does not match exactly the right frequency an you
have some little distortion, you can adjust the ´channel frequency by the Fine Tuning.
Please use for the fine tuning the
RIGHT
and
LEFT
button.
Note:
One time pressing of the
RIGHT
and
LEFT
button decrease or increase the frequency for 50
kHz.
46
