DVB-T
Please press the DVD/USB/DVB button on the remote control to appear the menu, where
you can change to DVB. Navigate with the UP or DOWN button the DVB and activate DVB
by pressing the ENTER button.
If you use DVB-T the first time, than the system entered to the First Time Installation.
First Time Installation
After all the connections have been
made properly, switch on your TV.
Make sure the
receiver is connected to the mains and press
<POWER> to switch the receiver on. If
you are using the receiver for the
first
time,
a
First
Time
Installation
menu will be
displayed to guide you through the
initial setup. Use the remote controller to
finish the setup.
At the
First time installation
menu, select
―YES‖ and press
ENTER
button
on the remote controller to proceed.
Enter your regional settings, include your
Country, Language, Time Zone.
Please change the country settings in
order to your active country.
Then select ―NEXT‖ to proceed.
Please navigate to ―YES‖ and confirm
by pressing the ENTER button. Than
the Auto search starts.
Note:
The previous channel list will be deleted and
replaced by the new one.
36
