Connection
Connect the Antenna
FM-Radio
Radio signals may be difficult to receive in some buildings and under certain conditions. The
Provided antenna will help in their reception. They are intended
for indoor use only.
Indoor Antenna
The FM antenna should be fully extended and in a direction that
provides the clearest signal. Secure the antenna ends in a
location where distortion is a minimum. If reception remains poor,
an outdoor antenna may be necessary.
Connect the Antenna
1.
Open cable terminal by pressing back on tab
2.
Insert wire end
3.
Release tab; make sure wire is in
terminal securely.
DVB-T
The unit has integrated a DVB-T TV tuner. To receive the
terrestrial broadcast, you need to connect the player with
an antenna. The best case is to use the roof
antenna. If your position is nearby the transmitters, than
you can a passive or an active indoor aerial.
Please pay attention that you can receive the DVB-T in your area.
Connect the Antenna
1.
Open cable terminal by pressing back on tab
2.
Insert wire end
3.
Release tab; make sure wire is in terminal securely.
Basic connection:
Ensure that the power switches of this unit and other equipment to be connected, are
turned off before commencing connection
Read attentively the instructions before connecting other equipments
Ensure that you observe the color-coding when connecting audio and video cords
Please connect the unit with TV by only one kind of video output format, and setup a
suitable output mode (including signal mode and signal code type), otherwise there
will be image distortion.
14
