Elo TouchSystems E221, Руководство пользователя

Страница: 10 / 16

ELO E221ZKE001
6. In a “ GPIO ” section user can configure all five pins of the
General Purpose port as Input/Output/RS232 Control signal.
When some of them are configured as input, it is possible to
enable sending alarms by an e-mail.
7. “ Alarms ” can be set if either any GPIO inputs state
combination comes or required pattern in serial data flow
appears.
8. “ System ” section stores network ID strings – adapter's name,
administrator contact..
9. “ Remote management ” enables the remote configuring the
adapter with Connectware Manager
10. In a “ Users ” section can be be managed user approved to
login and configure the adapter and assigned different rights
for every user.
11. A “ Management ” section shows active configuration and
allows some changes to that. It depends on chosen profile.
12. “ Administration ” section allows to customize web interface,
update firmware, backup profile settings, factory reset,
settings overview and remote reboot.
The configuring should be finished by clicking “ logout ”.
3.9 Serial Port profiles
As mentioned in chapter 1.1, the adapter can operate in different
modes. In the configuration window of the web interface, section
“
Configuration \ Serial ports ” can be chosen the proper mode by
clicking the “ port n ” link. The “ Serial Port Configuration “ window
appears. Click the “ Change Profile... ” link, and choose the right
9