User Manual: Elo
®
PayPoint for Windows
UM600039 Rev B, Page 27 of 33
Step 1. Loosen the hard drive access door screw and remove the door. The hard drive access
door is the larger of the two access doors on the back of the display head
Step 2. Slide the HDD out of the access door and remove it from the head.
Step 2. Unscrew the four screws from the hard drive sled, and replace the hard drive. Before
installing the new hard drive into the display, make sure the hard drive SATA connector and the
sled latch point toward the same direction.
Step 3. Reinsert the new hard drive into the register (hard drive sled facing down) and secure
access door. Power on the register to ensure proper hard drive installation.
